This is an insanely beautiful cushion! The nicest bow version I've actually ever seen.. so I visitititted the lovely website and it was in dutch so off to google translate I went and clicked for english...
This is the first line...
"The female form of the trap are appropriate BB-ruit very beautiful at. And is very simple make."
uhuh uhuh... Im starting to understand. Wha?! So Ive tried my best to translate it into usable (for me) english for when I go to make it. Must stick the kettle on *_*
Ok here goes! I hope
80CM (Just under one yard of) Gingham Fabric (137cm Wide - Standard Width)
Cushion 40×60 cm
How to make the Bow Cushion
Cut out the fabric for the cushion cover 1 piece of 42 × 124 cm,
for the band 1 piece of 32 × 58 cm and
the hanging ties 1 piece of 32 × 72cm.wadding for tie strip 1 piece of 32 × 72 cm.
Fold the cloth for the cushion cover, so it's 42 × 62 cm.
Stitch the short side with 2 inch seam, but leave a piece in the middle to open later and insert the pillow.
Fold the seam towards the middle and stitch the long side with 1 cm seam.
Turn the cover. Put the pillow in it and sew the opening closed.
(I might be inclined to create an envelope cushion cover so that I can remove it and wash it when I need to but I shall see how the band goes for the bow!)
Fold the band fabric to make a double layer, so it measures16 × 58 cm.
Stitch the long side with 1 cm seam and once the band. Stitch the ends with 1 cm seam together and once the seam on the inside.
for the ties hanging on the bottom of the bow - Create a "sandwich" from gingham fabric and wadding by folding the gingham fabric and having the wadding inside. When you fold the fabric over the wadding it should measure 16 × 72 cm. Stitch the short ends oblique, 45 degree angle, leaving the inclined lines are parallel to each other.
Cut the excess fabric to 1inch from the stitching. Stitch the long side closed but leave a small hole for turning inside out now and sewing the opening closed.
Fold the ribbon strip in half, so that the angled edges are aligned evenly and stitch the ties to the back of your 'band' just below the fold through all the layers, (basically a big hole through the band and the ties are attached to the back) so the cushion can be pushed through the band and ribbon strips hang underneath.
phewwwwww make sense?! If you think I am mental you can visit the original link and translate the tutorial yourself lol. It took a few goes to make sense of it but now I have it does indeed seem quite easy ^_^
Visit the link here from Ariadneathome NL
Like this post? Feel free to share it by using the buttons below ^_^